Category | LEM

LEM completes its range of high performance, compact, medium and high voltage transducers for the traction market with the DVM series

Posted on 22 September 2020

  25% less bulky due to reduced power losses; Improved accuracy and temperature stability Fully-isolated nominal measurement of 600-4200V DC, AC or pulsed Compact, light and robust package Combines 12 kV insulation with unmatched immunity against electromagnetic disturbances Meets latest IRIS requirements for rail traction applications LEM introduces the DVM series for insulated nominal voltage [...]

LEM introduces its first surface mounted SO8 isolated current transducers with integrated current conductor

Posted on 03 August 2020

  LEM introduces the GHS series: miniature, integrated circuit transducers for AC and DC isolated current measurement up to 100 KHz. These new components offer full isolation despite their small size, integrating the primary conductor for nominal current measurements of 10A, 12A, 16A or 20A with a measurement span of 2.5 times the nominal current, [...]

LEM introduces open - loop Hall effect current transducers with digital outputs

Posted on 10 June 2020

  LEM announces digital output versions of HO and HLSR open-loop Hall effect current transducers with analog to digital (A/D) conversion performed by an on-board sigma-delta modulator, giving a 1-bit serial bitstream output. These new components for nominal current measurements of 10, 32, 50, 80, 100, 120, 150, 200, 250 ARMS in 3 different mechanical [...]

LEM meets the demand for accurate and easy-to-install smart current sensors to empower the Internet of Energy (Smart Cities)

Posted on 19 May 2020

  LEM introduces a new LEM City range of products for future Smart Cities offering innovative and high quality solutions for measuring electrical parameters in Smart Grids, Industry 4.0 and renewable energy market. LEM has developed the “ART” Rogowski current sensor to measure current of up to 10000A AC and beyond. The ART achieves IEC [...]

LEM LH current transducer range pushes Hall effect technology to new limits for small currents

Posted on 17 May 2020

  LEM announces the LH family of transducers, a new range that can be mounted on printed circuit boards (PCBs) for non-intrusive, isolated measurements of DC, AC and pulsed currents from 25A to 100A nominal. The family consists of three new models: LH 25-NP, LH 50-P and LH 100-P. These new transducers are based on [...]

LEM new IT xx5 series provides exceptional accuracy over wide temperature range of -40°C to +85°C

Posted on 21 May 2020

  LEM extends its range of high-accuracy current transducers, announcing the new series of IT xx5 transducers for non-intrusive and isolated nominal measurements of DC, AC and pulsed currents from 60 A to 600 A. The range includes 4 new models: IT 65-S, IT 205-S, IT 405-S and IT 605-S. These new models offer an [...]

LEM new LF xx10 current transducers range pushes Hall effect technology to new limits

Posted on 24 October 2020

  LEM announces the new range of LF xx10 transducers for non-intrusive and isolated nominal measurements of DC, AC and pulsed currents from 100 A to 2000 A with 4 new series: LF 210-S, LF 310-S, LF 510-S, LF 1010-S.  A fifth, the LF 2010-S will be available in February 2015. LEM has developed a [...]

LEM extends the measurement range up to 250A for HO series high performance current transducers

Posted on 24 June 2020

  Open-loop Hall-effect ASIC-based current transducers measure up to 25 0 A DC, AC or pulsed Over-current detection and fault reporting Wide operating temperature range from -40 to +105ºC PCB-mount & panel-mount options with aperture or integrated primary conductor   LEM announces the addition of three new HO series of high performance current transducers which [...]

LEM's new HO 6, 10 and 25-P current transducers offer more flexible mounting in small packaging

Posted on 15 April 2020

  Open-loop Hall-effect ASIC based devices measuring up to 25A DC, AC or pulsed Over-current detection, fault reporting functions Operate over -40 to +105ºC PCB-mount design with aperture for the primary conductor   LEM has added three new members to its HO series of PCB-through-hole mounting current transducers, which provide an aperture of 8 x [...]

LEM: New benchmarks for energy saving and control

Posted on 28 March 2020

    The use of new process technologies enables the new generation of LEM open-loop Hall-effect current transducers to combine the performance of closed-loop current transducers but at a significantly lower price.   In today’s power electronics, the most widely discussed topic is the search for increased energy saving and control. Across all types of [...]